中工科技-密封件网首页 | 放到桌面 [请登录] [免费注册]   会员服务 会员积分 帮助中心
  产品 采购 企业 技术 展会
首页 产品大全 采购信息 企业大全 品牌展示 资讯中心 展会会议 服务项目
当前所在位置:首页 > 产品 > 机械密封件 > 密封圈

[促销] 德氏轴向密封VRM01(VRM01)

德氏轴向密封VRM01
供应商参考报价:面议
  供应商信息
· 德克迈特德氏密封(上海)有限公司 [上海市] 加为商业伙伴
  VIP会员 发送站内消息
联系人: 销售经理
所在城市: 上海市
详细地址: 德国汉堡
公司网站:  www.dichtomatik.de
电子邮件: mail@dichtomatik.de
公司电话: 49/40/669 89 - 0
传真: 49/40/669 89 - 101
  
详细信息  

The VRM 01 and VRM 02 are axial seals consisting of 2 sections, one coated metal ring and one mould vulcanised elastomer sealing element.

 

The metal ring protects the elastomer seal against damage, serves as a stand and support for the elastomer seal and simultaneously acts as a flinger. The elastomer seal is not firmly bonded to but stretched over the metal ring and is additionally held by the axial flange.

 

With the VRM 02 the metal ring is extended in an axial direction on the outer sheath. Additional labyrinth sealing is created in combination with the circulating groove in the sliding surface.

 

Description

Product group: Axial seal

Profil-Nr.

01 = standard

02 = extended metal ring

Seal material: NBR 70

Colour: black

Seal material: FKM 70

Colour: brown

Metallring: steel 1.0204 (SAE 1008) covered on demand

Metallring: stainless spring steel 1.4301 (SAE 304)

 

Area of application

VRM axial seals are mainly used in combination with rotary shaft seals. They are applied as modular sealing elements affixed in series to seal against dirt, dust, grease and water spray from the outside. VRM axial seals have been successfully used in drive technology and mechanical engineering for many years, e.g. in electric engines, transmissions, pumps, power saws, prop shafts, wheel hubs and axles, agricultural machinery, construction machinery, machine tools, roller bearing housings and washing machines.

 

Function

The VRM axial seal fits tightly on the shaft (press fit) and must be installed at a precisely defined distance from the metal sliding surface to guarantee the defined axial prestress of the elastomer sealing element.

 

In rotation, the sealing lip rubs axially against the metal sliding surface at the contact pressure resulting from the selected prestress. The required sealing function is thus achieved. The total axial contact pressure results from the prestress in the installation housing, the geometry of the sealing lip as well as the elasticity and tensile properties of the elastomer.

 

The VRM axial seal creates a centrifugal effect which contributes to the good sealing function. Dust, dirt and water spray from the outside are, for the most part, flung away.

 

With increasing peripheral speeds, the centrifugal force pushes the elastomer sealing element outwards which decreases the contact pressure. Above a certain peripheral speed, the sealing lip lifts up from the metal sliding surface completely. The VRM axial seal then operates only as a gap ring and flinger.

 

The VRM 02 additionally functions as a labyrinth seal. To achieve this, the sliding surface must be provided with a groove in which the extended metal ring can run. The VRM 02 provides additional protection due to the labyrinth in the housing groove and is used for applications with very high demands. 

 

Advantages of VRM axial seals

-  simple sealing element with narrow installation width

-  sealing against grease, dirt, dust and water spray

-  additional sealing function due to the centrifugal action of the metal ring

-  good in combination with rotary shaft seals

-  low demands on the sliding surface with regard to the surface quality

-  simple installation

-  the metal ring protects the elastomer sealing element against damage

-  the friction decreases with increasing peripheral speed as a result of centrifugal force 

-  good dynamic sealing action

-  no additional axial stop required

 

Media

Good chemical resistance to many mineral oils and greases

 

Operational application limits

Peripheral speeds: NBR ≤ 12 m/s

Temperature: NBR - 40°C to + 100°C

Pressure: designed for pressureless operation. The above-mentioned operating parameters are maximum values and may not occur simultaneously. Each is dependent on the other operating parameters.

 

Sliding surface

The VRM axial seal runs against a sliding surface placed at right angles to the shaft, e.g. the flange cover or end wall of a bearing housing. The metal air side of a rotary shaft seal (type WB, WC) is often also used as a sliding surface. The demands on the sliding surface are lower than with rotary shaft seals.

 

The sliding surface should have a machine-finished surface with a surface quality of max. Ra = 2 µm (adequate for many applications).

 

Prefabricated injection mould or moulded light-metal alloy parts as well as reshaped sheet steel can also function as sliding surfaces without additional treatment. These should, however, not have any surface abnormalities or faults such as sharp edges, burrs, cavities, corrugation, elevations or damage.

 

Shaft

The shaft should be produced with a tolerance acc. to ISO h9 (or the standard tolerance for roller bearings acc. to ISO g6 or n6) to guarantee the required press fit and good, secure positioning on the shaft. No further axial fixing is necessary.

 

To achieve the correct prestress of the elastomer seal when installing, it may be advisable to use an axial stop in the form of a shaft shoulder or a retaining ring.

 

The surface roughness of the shaft should not exceed Ra = 4 µm. The shaft should be provided with a 10-20° chamfer to facilitate installation. Sharp edges and burrs should be avoided, i.e. the transition should be polished. The sliding surface of the sealing lip should not be above Ra = 2 µm.

 

In comparison to other rotary seals, VRM axial seals are relatively insensitive to eccentricity, shaft imbalance and skew of the shaft.

 

Installation

The VRM axial seal is simple to install. The elastomer sealing element should be greased before installation to improve the dynamic friction coefficient and thus to ensure a longer lifespan (preventing excessive wear due to abrasion). This also avoids adhesion after a longer standstill period.

 

The VRM should be pressed into the correct installation position with the aid of an appropriate installation tool and applying even pressure. To avoid damage, the use of a hammer for installation is not permissible. If there is no provision for an axial stop, the installation tool must be appropriately constructed so that the axial prestress is maintained according to the requirements.

 

The sealing lip must under no circumstances be damaged or deformed while in storage.

  还没找到想要购买的产品吗?尝试免费发布求购信息,让供应商主动找上门!
  求购产品名: 热门供应: 干燥机 粉碎机 混合机
同类产品  

泛塞封厂家

PARKER密封

非石棉垫片

纯四氟垫片

单剖分式油封

CDLF3-36纯水

液力偶合器,限
 
加入我们,让您马上开始做生意!
免费推广产品,免费宣传公司
查找买家信息,结交商业伙伴
想开展网上贸易,提升销量?
推荐您选择VIP会员
服务热线:
《中工科技-密封件网》客服热线:
0571-28990953 28926072
《中工科技-密封件网》客服QQ:
您可以给我们留言,寻求帮助。
我们会在一个工作日内给您回复!
金牌会员广告服务高级商铺企业建站会员积分帮助中心联系我们友情链接
中工科技-密封件网 版权所有1999-2020 浙ICP备07502667号-21
业务QQ:   客服QQ:  
客服电话:0571-28990953 28926072  传真:0571-28926078 
版权所有:杭州中工科技有限公司 法律顾问:京衡律师集团事务所

浙公网安备 33010602003211号